HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 156

8
Adding a USB printer
Requirement:
Further information:
156
A USB printer is connected to the product.
"Connecting a printer", Page 59
Tap Settings in the main menu
Tap General
Tap Printers
If no default printer has been set up yet, a message appears
Tap "Close" in the message
Open in the sequence
Add printer
USB printer
Connected USB printers are detected automatically
Tap Located printers
The list of detected printers is displayed
If only one printer is connected, the printer is selected
automatically
Select the desired printer
Tap Located printers once again
The available printer information, e.g. name and description,
is displayed
If required, enter a name for the printer into the Name input
field
The text must not contain slashes ("/"), hash
characters ("#") or spaces.
Confirm the entry with RET
If required, enter an optional description for the printer into
the Description input field, e.g. "Color printer"
Confirm the entry with RET
If required, enter an optional location into the Location input
field, e.g. "Office"
Confirm the entry with RET
If required, enter the connection parameters into the
Connection input field, if they have not been entered
automatically
Confirm the entry with RET
Tap Select the driver
Select the appropriate driver for the printer type
If the appropriate driver is not listed, a suitable PPD
file must be copied to the product.
Further information:
The driver is activated
Tap Close in the message
Setup | Single steps for setup
"Finding PPD files", Page 160
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018