20.7.17 Configuring M Functions; 20.7.18 Documentation - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

20

20.7.17 Configuring M functions

Path:
Parameter
Number of the M function
Select image for dialog during
program run
Upload image file
Remove the entry

20.7.18 Documentation

Path:
The product provides the possibility to upload the corresponding Operating
Instructions in the desired language. The Operating Instructions can be copied
from the supplied USB mass storage device to the product.
The latest version can be downloaded from the download area at
www.heidenhain.de.
Parameters
Add Operating Instructions
356
Settings ► Service ► OEM area ► Settings ► Program run ► M functions
Settings ► Service ► Documentation
Explanation
Enter the number of the new M function
Setting range: M2.0 ... M120.0 (0: The output assigned to
the M function is switched to inactive)
Setting range: M2.1 ... M120.1 (1: The output assigned to
the M function is switched to active)
Setting range: M2.2 ... M120.2 (2: The output assigned to
the M function generates a high active pulse of 8 ms)
Select the desired image for display during program run
Copies a selected image file to the storage location /Oem/
Images
File format: PNG, JPG, PPM, BMP , or SVG
Image size: Max. 100 x 70 px
Remove the entry
Explanation
Adding the Operating Instructions in the desired language
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Settings | Service