Oem Bar; Operating Elements Of The Oem Bar - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

6
6.11

OEM bar

The optional OEM bar allows you to control the configuration of the functions of
the connected machine tool, independently of its configuration.

Operating elements of the OEM bar

6.11.1
The OEM bar usually provides the following operating elements:
Operating
element
98
The status bar and the optional OEM bar are not available in the
Programming menu.
The operating elements that are available on the OEM bar depend on
the configuration of the device and of the connected machine tool.
Further information: "Configuring the OEM bar", Page 130
Function
Logo
Displays the configured OEM logo
Spindle speed
Displays one or more values that have been predefined for
the spindle speed of a connected NC-controlled machine
tool
Further information:
spindle speed", Page 131
"Configuring nominal values for the
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Basic operation | OEM bar