HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 171

Setup | Single steps for setup
Presetting by probing (in the Turning application mode)
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Tap Manual operation in the main menu
The user interface for Manual mode is displayed
Tap Auxiliary functions in the status bar
Tap Presets in the dialog
The Set preset data dialog box opens
Move the tool to the desired position
Tap Save position
The current position of the tool is saved
Retract the tool to a safe position
Enter the desired position data in the input fields
Tap Confirm in the wizard
The dialog Select preset opens
Select the desired preset in the Selected preset input field:
To overwrite an existing preset, select an entry from the
preset table
To create a new preset, enter a number that has not yet
been assigned in the preset table and confirm with RET
Tap Confirm in the wizard
The probed coordinates are adopted as a preset
8
171