Single Steps For Setup; Basic Settings - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Setup | Single steps for setup
8.3

Single steps for setup

8.3.1

Basic settings

The commissioning engineer (OEM) may have already carried out
several basic settings.
Setting the date and time
Further information:
Setting the units of measure
You can set various parameters to define the units of measure, rounding methods
and decimal places.
Further information:
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Tap Settings in the main menu
Tap General
Tap Date and time
The set values are displayed in the following format: Year,
month, day, hour, minute
To set the date and time in the middle line, drag the columns
up or down
Tap Set to confirm
Select the desired format in the Date format list:
MM-DD-YYYY: Display as month, day, year
DD-MM-YYYY: Display as day, month, year
YYYY-MM-DD: Display as year, month, day
"Date and time", Page 311
Tap Settings in the main menu
Tap General
Tap Units
To set a unit of measure, tap the corresponding drop-down
list and select the unit
To set the rounding method, tap the corresponding drop-
down list and select the rounding method
To set the number of decimal places displayed, tap – or +
"Units", Page 312
8
149