HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 166

8
Setting the tool (in the Turning application mode)
166
Tap Manual operation in the main menu
The user interface for Manual mode appears
Tap Auxiliary functions in the status bar
Tap Tool data in the dialog
The Set tool data dialog box opens
Move the tool to the desired position
Tap Save position
The current position of the tool is saved
Retract the tool to a safe position
Enter the desired position data in the input fields
Tap Confirm in the wizard
The Select the tool dialog appears
Select the desired tool in the Selected tool input field:
To overwrite an existing tool, select an entry from the tool
table
To add a new tool, enter a number that has not yet been
assigned in the tool table and confirm by pressing RET
Tap Confirm in the wizard
The probed coordinates are adopted for the tool
Setup | Single steps for setup
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018