Oem Area; Oem Bar - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Settings | Service

OEM area

20.7.5
Settings ► Service ► OEM area
Path:
Parameters
Documentation
Startup screen

OEM bar

Settings
Back up and restore
Remote access for screenshots
OEM bar
20.7.6
Settings ► Service ► OEM area ► OEM bar
Path:
Parameters
Show bar
Bar items
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Explanation
Addition of OEM documentation, e.g. service information
Further information: "Adding documentation", Page 127
Changing the startup screen (e.g., with one's own company
logo)
Further information: "Adding a startup screen", Page 128
Customization of the OEM bar with specific functions
Further information: "OEM bar", Page 349
Adapting the user mode, the override display, the keyboard
design, and the program run.
Management of texts and messages.
Further information: "Settings (OEM area)", Page 354
Backing up and restoring the settings of the OEM area
Permitting a network connection with the ScreenshotClient
program so that ScreenshotClient can take screenshots of the
unit from a computer
Settings:
ON: Remote access is possible
OFF: Remote access is not possible
Default value: OFF
When the unit is shut down, Remote access for
screenshots is automatically deactivated.
Explanation
Display of the OEM bar
Settings:
ON: The OEM bar is displayed on the user interface of the
respective operating modes
OFF: The OEM bar is not displayed
Default value: OFF
Configuration of the Bar items on the OEM bar
Further information: "Adding OEM-Bar items", Page 350
20
349