HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 334

20
Settings for encoders with interfaces of the 1 V
Parameter
Encoder input
Incremental signal
Encoder model
Signal period
Line count
Mechanical ratio
Reference marks
334
and 11 μA
PP
Explanation
Assignment of the encoder input to the axis of the product
Settings:
Not connected
X1 (1 Vpp)
X2 (1 Vpp)
X3 (1 Vpp)
X4 (1 Vpp)
X5 (1 Vpp)
X6 (1 Vpp)
Further information: "Product overview", Page 50
Signal of the connected encoder
Settings:
1 Vpp: sinusoidal voltage signal
11 µApp: sinusoidal current signal
Default value: 1 Vpp
Connected encoder model
Settings:
Linear encoder: linear axis
Angle encoder: rotary axis
<dialogtext2 ID="1465399207710" isCustomElemen-
t=""><RefControl ID="N1038A" PickerElement="dialog-
text2" objType="stringobj" serverID="JACKRABBIT"
versionLabel="1.0" webdavID="1465399207710"/
>Angle encoder as linear encoder</dialogtext2><di-
alogtext2 ID="1465399207710" isCustomElemen-
t=""><RefControl ID="N1038A" PickerElement="dialog-
text2" objType="stringobj" serverID="JACKRABBIT"
versionLabel="1.0" webdavID="1465399207710"/>Angle
encoder as linear encoder</dialogtext2>: rotary axis is
displayed as linear axis
Default value: Depending on the connected encoder
For linear encoders:
length of a signal period
Setting range: 0.001 µm ... 1000000.000 µm
Default value: 20.000
For angle encoders and display of a rotary axis as a linear axis:
number of lines
Setting range: 1 ... 1000000
Default value: 1000
For display of a rotary axis as a linear axis:
traverse path in mm per revolution
Setting range: 0.1 mm ... 1000 mm
Default value: 1.0
Configuration of the Reference marks
Further information: "Reference marks (Encoder)", Page 336
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Settings | Axes
type
PP