Status Bar; Operating Elements Of The Status Bar - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Basic operation | Status bar
6.10

Status bar

The status bar and the optional OEM bar are not available in the
Programming menu.
The status bar displays the feed rate and the traversing speed. The operating
elements of the status bar also give you direct access to the preset table and tool
table, as well as to the stopwatch and calculator features.
6.10.1

Operating elements of the status bar

The status bar provides the following operating elements:
Operating
element
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Function
Quick access menu
For setting the units of measure for linear and angular
values, configuring a scaling factor, and configuring the
position display for radial machining axes (in the Turning
application mode); tapping it opens the quick access menu
Further information: "Adjusting settings in the quick
access menu", Page 94
Preset table
Display of the current preset; tapping opens the preset
table
Further information: "Creating a preset table", Page 168
Tool table
Display of the current tool; tapping opens the tool table
Further information: "Creating a tool table", Page 164
Stopwatch
Time display with Start / Stop function in h:mm:ss format
Further information: "Stopwatch", Page 95
Calculator
Calculator with the most important mathematical functions,
speed calculator, and taper calculator
Further information: "Calculator", Page 96
Feed rate
Display of the actual feed rate of the currently fastest axis
The feed-rate value can be set in the Manual operation and
MDI operating modes; tapping it opens the feed-rate menu
6
93