Running The Program - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Milling – Quick Start | Machining a bolt hole circle and row of holes (Program run)
9.10.2

Running the program

HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
On the machine tool, insert the Ø 6.1 mm drill into the
spindle
Tap NC START on the program control
or
On the machine tool: Press the NC START key
The product selects the first tool call block of the program
The wizard displays the relevant instructions
Tap NC START again to begin machining
or
On the machine tool: Press the NC START key
The spindle speed is set and the first machining block for bolt
hole circle is selected
The single steps of the bolt hole circle machining block are
displayed
Tap NC START to move the axis
or
On the machine tool: Press the NC START key
A movement is executed
Depending on the machine tool, carry out user intervention,
e.g. manually move the Z axis when drilling through
Call the next step of the bolt hole circle machining block with
Next
The next step is called
Tap NC START to execute the next movement
or
On the machine tool: Press the NC START key
Follow the instructions of the wizard
After executing all steps in the bolt hole circle machining
block, tap Next program step
The next machining block, row of holes, is selected
The single steps of the row of holes machining block are
displayed
On the machine tool, insert the Ø 5.0 mm drill into the
spindle
Repeat the process for the row of holes machining block
After drilling the row of holes tap Close
The machining is terminated
The program is reset
The wizard is closed
9
197