Configuring The Oem Bar - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

7

Configuring the OEM bar

7.4.3
You can configure the appearance and the menu items of the OEM bar.
Showing or hiding the OEM bar
Configuring the OEM logo
You can display an OEM-specific company logo on the OEM bar. By tapping the
OEM logo, you can optionally open a PDF file of the OEM documentation.
Configuring an OEM logo
130
If you configure more menu entries than can be shown in the OEM bar,
then you can scroll the OEM bar vertically.
Tap Settings in the main menu
Tap Service
Open in the sequence
OEM area
OEM bar
Activate or deactivate Show bar with the ON/OFF sliding
switch
Tap Settings in the main menu
Tap Service
Open in the sequence
OEM area
OEM bar
Bar items
Tap Add
Tap the Description input field
Enter a description for the menu item
Confirm the entry with RET
Tap Logo in the Type drop-down list
Tap Select logo to choose a stored image file
If required, select a new image file with Upload image file
Further information:
Navigate to the folder containing the image file, and select
the file
Tap Select
Select the desired option in the Link to documentation drop-
down list
"Logo OEM bar item", Page 351
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Commissioning | OEM area