In Case Of Damage In Transit - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

3
Acces-
sories
For mounting
3.4

In case of damage in transit

Have the shipping agent confirm the damage
Keep the packaging materials for inspection
Notify the sender of the damage
Contact the distributor or machine manufacturer for replacement parts
38
Name
Cables
Mounting frame
Multi-Pos holder
Duo-Pos stand
Multi-Pos stand
Single-Pos stand
If damage occurred during transit:
Keep the packaging materials for inspection
Contact HEIDENHAIN or the machine manufacturer
This applies also if damage occurred to requested replacement parts
during transit.
Transport and storage | In case of damage in transit
Description
For information on connect-
ing cables, see "Cables
and Connectors for
HEIDENHAIN Products"
brochure.
Mounting frame
for mounting of the
QUADRA-CHEK 3000 and
POSITIP 8000 subsequent
electronics in a panel
Holder for fastening the
device on an arm, continu-
ously tiltable within an angle
of 90°, fixing hole pattern
100 mm x 100 mm
Stand for rigid mounting,
inclination angle 20° or
45°, fixing hole pattern
100 mm x 100 mm
Stand for continuously
variable tilting within an
angle of 90°, fixing hole
pattern 100 mm x 100 mm
Stand for rigid mounting,
inclination angle 20°, fixing
hole pattern 100 mm x 100
mm
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
ID
---
1089208-02
1089230-04
1089230-02
1089230-03
1089230-01