Depiction As Contour View - HEIDENHAIN ND 7000 Operating Instructions Manual

13
13.4.1

Depiction as contour view

The simulation window displays a contour view. The contour view provides the
necessary feedback for precisely positioning the tool or for following a contour
along the machining plane.
The contour view uses the following colors (defaults):
Figure 54: Simulation window with contour view
1 Machining pattern (white)
2 Current block or machining position (green)
3 Tool contour, tool position and tool track (orange)
Activating the simulation window
206
Tap Graphic
The simulation window for the currently selected block
appears
Milling – MDI mode | Using the simulation window
1
2
3
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018