Requirements - HEIDENHAIN ND 7000 Operating Instructions Manual

9
9.3

Requirements

To manufacture the aluminum flange, use a manually operated machined tool. The
following dimensioned technical drawing is available for the flange:
Figure 30: Example workpiece– technical drawing
Machine tool
The machine tool is switched on
A pre-processed workpiece blank is clamped on the machine tool
Product
A unit with the ID number 1089179-xx and configured spindle axis
The reference mark search has been performed
Further information:
A HEIDENHAINKT 130 Edge Finder is available
154
100
90±0.05
80±0.1
Ø50±0.05
"Conducting the reference mark search", Page 183
Milling – Quick Start | Requirements
A-A
20
13
10
1x45°
6
HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018