Reaming The Fit - HEIDENHAIN ND 7000 Operating Instructions Manual

Milling – Quick Start | Machining a fit (MDI mode of operation)
9.7.2

Reaming the fit

HEIDENHAIN | ND 7000 | Operating Instructions | 05/2018
On the machine tool, insert the Ø 20 mm H6 reamer into the
spindle
On the product, set a spindle speed of 250 rpm
On the OEM bar: Tap Coolant ON
Follow the instructions of the wizard
Ream the through hole and retract the spindle
On the OEM bar: Tap Coolant OFF
Tap Close
Program run is terminated
The wizard closes
You have successfully machined the fit
9
163