Setting the TOOL UP HEIGHT
Tip of the tool might touch the media when the blade is moved in normal tool up status when using a thick
media such as sand blast rubber. TOOL UP HEIGHT is set to raise the tool higher than normal tool up
status for these cases.
Leave the TOOL UP HEIGHT to default value (0) when using the media with normal thickness.
Height of normal tool up status
Press the [MENU] key.
MENU screen is displayed.
Press the  key (TOOL).
TOOLSSETTING screen (1/3) is displayed.
Press the POSITION (¡ã ) key.
TOOLSSETTING screen (3/3) is displayed.
Press the  key (TOOL UP HEIGHT).
TOOL UP HEIGHT setting screen is displayed.
Height set with the TOOL UP HEIGHT
It will return to TOOL setup screen (3/3) without
changing the settings when you press the
POSITION (? ) key (CANCEL).
T ool higher than normal
tool up status with TOOL
UP HEIGHT set