Download Print this page
   

Advertisement

NEC SV8100
InMail User Guide
Your new Voice Mail System is operated using the 4 softkeys under your display.
Your Mailbox Number is the same as your telephone extension number.
Start by Logging into Your Mailbox
Press "VMsg" softkey
To listen to your messages:
1. Push Lstn softkey:
2. While listening to your message, you can do one of the following:
– Dial RE (73) to record a reply for the message sender.
– Dial MF (63) to forward the message to a co-worker.
– Dial MC (62) to make a return call to the message sender.
– Dial TI (84) to hear the time and date the message was sent.
– Dial SA (72) to save the message in your mailbox.
– Push Erase to erase the message.
– Push Next to listen to the next message.
– Dial B (2) to back the message up a few seconds,
or G (4) to go ahead a few seconds.
– Push Rpt to repeat the message from the beginning.
– Dial * to pause and resume listening.
– Push Exit to exit the message listen mode.
To record a greeting for your mailbox:
1. Push Greet softkey.
2. Push Gr1, Gr2 or Gr3 to select which of the three available greetings
you want to be active.
3. Do one of the following:
– Push Lstn to listen to your greeting (if recorded).
– Push Rec to record a new greeting.
– Push Erase to delete your greeting (and use the built-in prerecorded
greeting).
– Push Exit to exit without changing your greeting.
To record a name for your mailbox:
1. Dial RN (76).
2. Do one of the following:
– Push Lstn to listen to your name (if recorded).
– Push Rec to record a new name.
– Push Erase to erase your name (and use your extension number instead).
– Push Exit to exit without changing your name.
To enter a security code for your mailbox:
2. Dial OP (67) and push CODE.
3. Do one of the following:
– Enter a new security and push OK.
– Push Erase to erase your security code.
– Push Exit to exit without changing your security code.
NEC SV9100
USER GUIDE
541-686-1654

Advertisement

   Summary of Contents for NEC SV9100

  • Page 1

    NEC SV9100 NEC SV8100 USER GUIDE InMail User Guide Your new Voice Mail System is operated using the 4 softkeys under your display. Your Mailbox Number is the same as your telephone extension number. Start by Logging into Your Mailbox Press “VMsg”...

  • Page 2

    FEATURE ACTION FEATURE ACTION TO PLACE AN Lift the handset, or press “Speaker” button CALL FORWARD Press "Speaker" OUTSIDE CALL Dial "9" to access an outside line BUSY/ NO ANSWER Dial CF/BNA Code 744 Dial selected telephone number Dial 1 Dial the destination Ext.

Comments to this Manuals

Symbols: 0
Latest comments: