Schlage PIB300 User Manual page 76

Set Language
Set Date
Format
Set Time and
Date
!
NOTE
Set Address
Set ID Length
The Set Language command allows the language shown on the HandReader's display
to be "localized" for a variety of countries. The default language is English. The following
languages are available.
English
French
German
Indonesian
Italian
The Set Date Format command allows the date format shown on the HandReader's
display to be "localized" for a variety of countries. The default date format is the U.S.
standard date format – MM/DD/YY. The following date formats are available.
mm/dd/yy
dd-MMM-yy
dd-mm-yy
dd/mm/yy
The Set Time and Date command allows the HandReader's time and date to be set. If the
HandReader is networked to a PC, this step is not necessary as the HandReader's time
and date will be set by the host computer.
Stand-alone HandReaders and HandReaders on a master/remote HandReader network
require adjustment for the daylight savings time changes. HandReaders networked to a
host PC do not require adjustment as the host PC automatically makes the adjustment.
Time is kept using a 24-hour clock. The time is set in the following format.
Hour: two digits – 00 to 23
Minute: two digits – 00 to 59
The date is set in the following format.
Month: two digits – January = 01, incrementing to December = 12
Day: two digits – 01 through 31
Year: two digits – enter the last two digits of the current year (i.e. 2001 = 01)
The Set Address command allows a unique address to be set for each HandReader in
a network. For proper operation, each HandReader in the network must have a unique
address. Addresses 0 to 254 are available – address 255 is reserved for the master
HandReader in a network. The default address is 0. An address does not need to be set
for stand-alone HandReaders.
The Set ID Length command allows you to reduce the number of keystrokes required
to enter the ID number by eliminating the use of the key to complete an ID number
entry. Once the ID Length is set, when a user enters an ID number the HandReader
will automatically accept that number once the correct number of characters have been
entered. Set ID Length does not apply when ID entry is made from a card reader. Set ID
Length cannot be used if a Duress Code has been assigned.
Japanese
Polish
Portuguese
Russian
Spanish
mm-dd-yy
MMM dd,yy
ddMMMyyyy
HandKey II Manual
43