Table of Contents
Advertisement
Enter a Command Menu
If Users are
Enrolled in the
HandReader
!
NOTE
Navigating
Command
Menus
34
1. The display appears as follows.
2. Enter your ID number on the keypad and place your hand on the platen for
verification.
3. If verification is successful, the display appears as follows.
4. Enter the password for the menu you wish to enter. The default passwords are as
follows.
1
Press
for the Service Menu.
2
Press
for the Setup Menu.
3
Press
for the Management Menu.
4
Press
for the Enrollment Menu.
5
Press
for the Security Menu.
5. Press
Enter
6. If you are authorized to use this command the first command option in the selected
menu appears.
7. If you are not authorized to enter this command the display appears as follows.
To access all five menus you must be the first person enrolled in a new system
installation or you must have the highest authority level and the correct passwords for all
five menus. If you are blocked from a menu to which you should have access, verify your
access/password rights with management personnel. If authority levels or passwords
have been incorrectly changed and you must have access to all menus, it is possible to
reset the HandReader's memory. Resetting memory allows access to all five menus by
the first person enrolled (as if it is a new system installation), but this means that any user
information programmed into the HandReader must be re-entered (manually or by using
HandNet software to restore the user information). Be sure you need to reset memory
before performing this function. To reset memory, refer to Erasing HandReader Memory
on page 31.
Once an operator has entered a command menu, there are three options available for
navigating the command menu system.
#
• Press
to enter the command shown on the display.
Yes
*
• Press
to step to the next command in the menu.
No
• Press
to exit the command menu (pressing any numeric key also exits the
Clear
command menu). If the operator is in a command's sub-menu, the operator may have
to press
multiple times to completely exit the command menu.
Clear
ENTER PASSWORD
READY
*:
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
