Schlage PIB300 User Manual page 74

Hide thumbs Also See for PIB300:

Table of Contents

Navigating the

The Setup menu commands allow you to set the basic operating parameters for the

Once in the Setup menu you can step through and set the parameters for each command

sequentially. You do not have to exit command mode after setting any individual

Once you have entered the Setup menu, there are three options available for navigating

the command menu system.

to enter the command shown on the display.

to step to the next command in the menu.

to exit the command menu (pressing any numeric key also exits the

command menu). If you are in a command's sub-menu, you may have to press

multiple times to completely exit the command menu.

There are 12 commands available from the Setup command menu.

• Set Language

• Set Date Format

• Set Time and Date

• Set Address

• Set ID Length

• Set Facility

• Aux Out Control

• Set Reader Mode

• Set Serial

• Set Duress Code

• Set Beeper

Refer to and identify the command you need to perform. Step through all previous

commands until you reach the desired command.

Show Quick Links

Chapters

Table of Contents