Schlage PIB300 User Manual page 88

Set User Data
Set TZ Table
!
NOTE
!
NOTE
The Set User Data command allows you to set the User Authority level, the User Reject
Level, and the User Time Zone.
• The Authority Level controls which command menus a user is allowed to access; the
higher the authority level, the greater the number of menus the user may access.
• The User Reject level allows you to set the number of failed hand read attempts for a
user before rejecting further attempts by that user.
• The User Time Zone allows you to assign a time zone to a user, restricting the time-of-
day that a user may be granted access.
The Set TZ Table command allows you to create or edit Time Zone and Holiday tables.
A time zone is an identified period-of-time and days-of-the-week, during which a user is
allowed access to an area secured by a HandReader. Once a user is assigned a Time
Zone, access attempts outside of that time/date period are rejected by the HandReader.
A time zone may be "split." This means that a time zone may identify more than one set
of period-of-time and days-of-the-week – up to four sets in one time zone. This provides a
great deal of flexibility in providing secured access through a HandReader.
Time Zone information can also be printed for review or cleared if a time zone becomes
unnecessary.
All time entries made for time zones are entered in 24-hour format. For example, 8 A.M.
is entered as 08:00, 5 P.M. is entered as 17:00, and 11 P.M is entered as 23:00.
The Holiday schedule for a calendar year can be entered. Once a holiday schedule is set,
holidays are applied to time zones just like another day of the week (1 to 7 for the days
of the week, 8 for holidays). Once entered, the holiday schedule can be printed for review
and cleared.
Certain holidays, such as Easter and Thanksgiving, change their days from year to year.
You must review and edit your holiday schedule each year to ensure the correct days are
counted as holidays.
An Unlock Time Zone can also be set. The unlock time zone is a special time zone that
automatically unlocks the door associated with a HandReader when the time zone is
active, and then automatically locks that door when the time zone becomes inactive. This
can be used on doors where general access is allowed during specific times of the day
(such as business hours).
HandKey II Manual
55