Schlage PIB300 User Manual page 68

Programming the HandReader
The HandReader is programmed via a series of command menus. A summary of the
menus and commands is given in Table 6.
Table 10-5: Basic Command Mode Structure
Service Menu Setup Menu
Password 1 Password 2
Calibrate Set Language
Status Display Set Date Format Data From
Network Status* Set Time
and Date
Set Address
Set ID Length
Set Output
Mode
Set Facility
Lock/Shunt
Time
Aux Out Control
Set Reader
Mode
Set Serial
Set Duress
Code
Print Options
Set Beeper
Upgrade
* These menu options only appear in HandReaders configured as a "Master" unit.
To control access to the command menus, each menu has a unique password. This
password is requested as a part of the process for accessing each menu. A supervisor
must enter the correct password for that menu to access that menu. The default menu
passwords are given in Table 6.
To increase the security of the HandReader, Schlage Biometrics recommends changing
the passwords for the command menus to new numbers. These password numbers can
be up to 10 digits long. This is done with the Set Passwords command described on.
Management Enrollment
Menu Menu
Password 3 Password 4
List Users Add User
Add/Remove
Network* User
Data to
Network*
Security Menu
Password 5
Set User Data
Set TZ Table
Reject
Threshold
Set Passwords
Clear Memory
Special Enroll
35