Appendix 2 Event List; Guide For Reference Of Event List - Mitsubishi Electric MELSEC iQ-R16MTCPU Programming Manual

Appendix 2
Information such as errors detected by the Motion CPU, and operations done for the module, are saved as "event history" in
the standard ROM of the Motion CPU, or the SD memory card.
Refer to event history function for details of the event history function. (Page 373 Event History Function)
When an event occurs, its event code and description can be read using MT Developer2.

Guide for reference of event list

The event list contains the following information.
Item
Event code
Event type
Event category
Detected event
Detailed information 1 to 3
Detailed information
The contents of detailed information 1 to 3.
Detailed Item
information
Detailed Operation source information
information 1
Event history file information
G-code control information
Machine control information
Axis control event information
Time information
Home position return information
SSCNET(/H) communication information
Parameter change information
Transient command information
Operating system version information
Detailed Communication speed and communication mode
information 2
Communication status
Security key operation information
Remote password information
File password information
Disconnected IP address information
Drive and file information
Operation target information

Detailed
information 3
APPENDICES
422

Appendix 2 Event List

Event List
Description
The ID number of each event
The type of each event
The category of each event
The description of each detected event
Details of each detected event
Description
The following information on the operation source.
• Connection port (connection information such as Ethernet or USB)
• I/O No.
• CPU No. (the CPU No. of each CPU module in a Multiple CPU system)
• Network No.
• Station No.
• IP Address
Information on the event history file.
Information on G-code control.
Information on machine control.
Information on axis control.
Information on time.
Information on home position return.
Information on SSCNET(/H) communication.
Information on parameter.
Information on transient command.
Information on version of operating system software.
Information on the communication speed and the communication mode.
Information on the communication status.
Information on security keys.
Information on the remote password.
Information on the file password.
Information on the disconnected IP address.
Information on drive names and file names.
Information about the operation target (I/O No.).
