Chapter 8 Motion Cpu Memory Structure; Memory And Files; Standard Rom/Sd Memory Card Specifications - Mitsubishi Electric MELSEC iQ-R16MTCPU Programming Manual

8
MOTION CPU MEMORY STRUCTURE
Programs and parameters used for Motion CPU control are stored as files in a nonvolatile memory "standard ROM" built in to
the Motion CPU, or a "SD memory card" installed in the SD memory card slot of the Motion CPU.
The SD memory card can be removed from the Motion CPU and used with peripheral equipment such as personal
computers, facilitating flexible data management.
Furthermore, by saving the system operating system software in a predetermined folder beforehand, it can be installed in the
Motion CPU.
8.1

Memory and Files

Standard ROM/SD memory card specifications

The Motion CPU standard ROM and SD memory card specifications are as follows.
Item
*1
Memory capacity
Formatting prior to initial use
Formatting method
*1 Total capacity including file management area. The capacity excluding the file management area is smaller. Free memory space can be
checked with MT Developer2.
*2 Formatting is completed prior to shipping.
*3 Format SD memory cards with MT Developer2. If formatted with the Windows formatting function or with a device other than a Motion
CPU module (PLC, etc.), it will not be possible to use SD memory cards by inserting them into the Motion CPU module.
Available operations
The following operations can be performed for standard ROM and SD memory cards.
Operation
Motion CPU initialization with rotary switch
MT Developer2
File transmission at boot
Motion SFC program cam data operation instructions
(CAMRD/CAMWR/CAMMK)
*1 Refer to memory initialization for details. (Page 352 Memory Initialization)
• SD memory cards cannot be used if write protected.
• Read-only files cannot be written to or deleted.
• The file update date and creation date is based on the No.1 PLC CPU clock data.
8 MOTION CPU MEMORY STRUCTURE
346
8.1 Memory and Files
Standard ROM
12288kbytes
Not required
• MT Developer2 "Motion CPU memory format"
• Initialization with rotary switch
*1
*1
Memory formatting
CPU writing/reading Writing
Reading
Deletion
Digital oscilloscope Writing
Reading
Deletion
Writing
Reading
Deletion
Writing
Reading
*2
Standard ROM













SD memory card
SD memory card capacity (Up to 32Gbytes)
*3
Required
MT Developer2 "Motion CPU memory format"
SD memory card












