Mitsubishi Electric MELSEC iQ-R16MTCPU Programming Manual page 366

■Writing the license key using an SD memory card
The procedure for using an SD memory card to write the license key is shown below.
License
Purchase the add-on library license.
purchase
Get the
Check the serial No. of the Motion CPU
Motion CPU
to write the license key.
serial No.
Insert USB dongle in personal computer.
Perform the following in MT
Generate
Developer2.
license
• Select add-on library.
key offline
• Select Motion CPU model.
• Set Motion CPU serial No.
• Generate license key.
• Export the license key to file.
License key
Use a personal computer to store the
writing, and license key file in the SD memory card.
add-on
library
installation
Use the SD memory card for installation.
Turn ON the power supply of Multiple
CPU system.
Confirmation
of license
authentication
Check that the license authentication
information screen in MT Developer2
is "Authentication complete".
*1 Refer to the following for details of MT Developer2 operation.
Help of MT Developer2
*2 Page 355 Installation procedure using SD memory card
• Create a "instnew" folder in the root of the SD memory card and store the license key file in that folder to
execute installation.
• When installing from the "inst" folder in the SD memory card, the files from the SD memory card overwrite
the files in the built-in memory without deleting existing files in the built-in memory. When there are multiple
license keys written to the existing license key file, be sure to write all the required license keys to the new
license key file to be written from the SD memory card.
• When installing from the "instnew" folder in the SD memory card, existing files in the built-in memory are
deleted before the files in the SD memory card are written. Therefore, when the operating system and add-
on library files do not exist in the SD memory card, the operating system and add-on library will be deleted
from the Motion CPU.
• When an error is detected after starting installation and installation is not completed correctly, "ER0 (SD
memory card access error)", "ER1 (install file error)", "ER2 (built-in ROM access error)", or "ER3 (license
key file error)" are displayed on the dot matrix LED. Install the files again after handling the error.
8 MOTION CPU MEMORY STRUCTURE
364
8.5 Add-on Function
START
*1
*1
END
If a license is purchased, a USB license key (USB dongle with
license information) is supplied.
Use the set serial No. (product information) to generate the license key.
Create a "inst" folder in the root of the SD memory card, and store the
file in that folder.
Refer to installation procedure using SD memory card for details on
*2
installation.