Dynamic Routing; Event Reception From Other Stations; Module Operation Mode - Mitsubishi Electric MELSEC iQ-R Series User Manual

Dynamic Routing

Select whether to enable the dynamic routing function. ( Page 53 Communications using the engineering tool)
Item
Dynamic Routing
When enabling dynamic routing, do not connect the CPU module (built-in Ethernet port part) and the
RJ71GN11-T2 on the same Ethernet using a switching hub or other means.

Event Reception from Other Stations

Select whether to obtain the events occurring in the other stations.
Item
Event Reception from Other Stations

Module Operation Mode

Set the module operation mode of the RJ71GN11-T2.
Item Description
Module Online
Operation • Select this mode to connect the RJ71GN11-T2 to the network for performing data link with other
Mode stations.
Offline
• Select this mode to disconnect the RJ71GN11-T2 from the network and not perform data link with other
stations.
Module Communication Test
• Select this mode to check the hardware of the RJ71GN11-T2. Select this mode to check the module
hardware when communication is unstable. ( Page 168 Module Communication Test)
The following functions are disabled when "Module Operation Mode" is set to "Offline" or "Module
Communication Test". ( Page 18 FUNCTIONS)
• Cyclic transmission
• Transient transmission
• RAS (slave station disconnection, automatic return)
• Safety communications
In line topology, data link is not performed for stations connected after a station in offline mode.
Description
When communicating with different networks, select whether to enable the dynamic
routing function.
Description
Select whether to obtain the events occurring in the other stations.
Setting range
• Enable
• Disable
(Default: Enable)
Setting range
• Enable
• Disable
(Default: Enable)
Setting range
• Online
• Offline
• Module Communication Test
(Default: Online)
2 PARAMETER SETTINGS
2.4 Application Settings
2
111