Mitsubishi Electric MELSEC iQ-R16MTCPU Programming Manual page 380

Melsec iq-r series motion controller

Hide thumbs Also See for MELSEC iQ-R16MTCPU:

Table of Contents

• Even if "[Rq.1148] Servo error reset command (R: M34488+32n/Q: M3208+20n)" turns ON at the servo

error occurrence, the same error code might be stored again.

• When a servo error occurs, reset the servo error after removing the error cause on the servo amplifier side.

• Clearing of all the warning codes and error codes stored in the error code storage register, and reset of all

error detection signals can be performed with "Error reset (SM50)".

Appendix 1 Error Codes

Show Quick Links

Table of Contents

Melsec iq-r32mtcpu melsec iq-r64mtcpu