Connection Of Sscnetiii/H Head Module; System Configuration - Mitsubishi Electric MELSEC iQ-R16MTCPU Programming Manual

5.6

Connection of SSCNETIII/H Head Module

The MELSEC-L series SSCNET/H head module (LJ72MS15) can be connected to the Motion CPU module.

System configuration

A system configuration that uses SSCNET/H head modules is shown below.
Motion CPU module
R MTCPU
MT Developer2
The parameters of the SSCNET/H head module and modules mounted to the SSCNET/H head module
are set using GX Works2. Refer to the following for details of the SSCNET/H head module.
MELSEC-L SSCNETIII/H Head Module User's Manual
5 FUNCTIONS USED WITH SSCNET COMMUNICATION
198
5.6 Connection of SSCNETIII/H Head Module
SSCNETµ/H
SSCNETµ/H
R64MTCPU: 2 lines (Up to 64 axes
R32MTCPU: 2 lines (Up to 32 axes
R16MTCPU: 1 line (Up to 16 axes)
Servo amplifier
MR-J4(W)- B
Servo amplifier
MR-J4(W)- B
(Up to 32 axes/line))
(Up to 16 axes/line))
I/O module,
intelligent function
module
SSCNETµ/H
head module
LJ72MS15
GX Works2
SSCNETµ/H head module
LJ72MS15
R64MTCPU: 2 lines (Up to 8 stations
(Up to 4 stations/line))
R32MTCPU: 2 lines (Up to 8 stations
(Up to 4 stations/line))
R16MTCPU: 1 line (Up to 4 stations)