Mitsubishi Electric MELSEC iQ-R16MTCPU Programming Manual page 323

Setting batch send (TCP/IP protocol) of multiple data
By using the format output string setting of TCP/IP protocol, image data after the job is finished can be sent in a batch to the
Motion CPU. Set with the following procedure using In-Sight
Operating procedure
1.
Click the [Online] icon on the tool bar, and shift to the offline mode.
2.
Click the [Communication] button under Application Steps to display the Communications screen.
3.
Click the [Add Device] button to display the screen of Device Setup.
4.
Select "Other" for "Device".
5.
Select "TCP/IP" for "Protocol", and click the [OK] button.
2.
3.

Explorer.
4.
5.
1.
®
<Screen: In-Sight Explorer>
6 COMMUNICATION FUNCTIONS
6.5 Vision System Connection Function
6
321