Mark Detection Setting - Mitsubishi Electric MELSEC iQ-R16MTCPU Programming Manual

Mark detection setting

This section describes the mark detection setting items. Up to 64 mark detections setting can be registered.
[Motion CPU Common Parameter]  [Mark Detection]
Window
Displayed items
Item
High-speed input request signal
Mark detection process compensation time
Mark detection Mark detection data
data
Axis No.
Set data
Device
Data type
Estimate calculation
Ring counter value
Mark detection data storage device
Mark detection Upper value
data range
Lower value
Mark detection Mark detection mode setting
mode setting
Number of detections
Device
Number of mark detections
counter
Mark detection current value monitor device
*1 The mark detection signal compensation time cannot be set if "Invalid" is selected in the estimate calculation. (0[s] is set.)
*2 When Motion control data selected
*3 When word device data selected
*4 This setting can be omitted.
4 AUXILIARY AND APPLIED FUNCTIONS
102
4.3 Mark Detection Function
Setting range
1 to 64
*1
-5000000 to 5000000[s]/Word device
Motion control data/Word device data
*2
1 to 64
*2
Page 104 Motion control data
*3
Word device
*3
16-bit integer type/32-bit integer type/64-bit floating-point type
*3
Valid (Normal data)/Valid (Ring counter)/Invalid
*3
16-bit integer type: K1 to K32767, H001 to H7FFF
32-bit integer type: K1 to K2147483647, H00000001 to H7FFFFFFF
64-bit floating-point type: K2.23E-308 to K1.79E+308
Word device
Direct designation (K, H)/Word device
16-bit integer type: K-32768 to K32767, H0000 to HFFFF
32-bit integer type: K-2147483648 to K2147483647, H00000000 to HFFFFFFFF
64-bit floating-point type: K-1.79E+308 to K-2.23E-308, K0, K2.23E-308 to K1.79E+308
Continuous detection mode/Specified No. of detection mode/Ring buffer mode/Word device
1 to 8192 (Specified number of detection mode/Ring buffer mode)
Word device
*4

(Continuous detection mode)/Word device
*4
 /Word device