Mitsubishi Electric MELSEC iQ-R16MTCPU Programming Manual page 322

■Image Data Storage Device
Set the word device for storing the image data obtained when the job was executed.
The image data is stored only when the format output string setting of TCP/IP protocol is set in the vision
system. (Page 321 Setting batch send (TCP/IP protocol) of multiple data)
This does not need to be set if the format output string setting of TCP/IP protocol is not set in the vision system. Refer to
device list for the range of word devices that can be set. (Page 75 Device List)
Set the device No. as an even-number.
The image data is stored as a 64-bit floating point type every four successive points from the specified device equivalent to
the output data set with the format output string setting of TCP/IP protocol.
Use the type conversion instruction of Motion SFC according to the application.
6 COMMUNICATION FUNCTIONS
320
6.5 Vision System Connection Function
Specified device +0
+1
+2
+3
286.530
+4 +8
+5 +9
+6 +10
+7 +11
262.685 -10.652