Key Border Settings - Sony MVS-8000X User Manual

Multi format switcher system with ccp-8000 series center control panel volume 2
Hide thumbs Also See for MVS-8000X:
Table of Contents

Advertisement

5
To soften the inside of the edges and the boundaries between adjacent
edges, turn on [Edge Soft], and adjust the following parameters.
Knob
1
2

Key Border Settings

Notes
The Key Border function is not supported on the MVE-8000A.
Applying key borders
1
In the DME menu, select VF1 'Edge' and HF3 'Key Border.'
The Key Border menu appears.
2
Press [Key Border], turning it on.
This enables key borders, and you can now use the knobs to adjust the
parameters.
Notes
The key border function and Glow function (see page 93) cannot be turned
on at the same time. Only the one most recently turned on is effective.
3
Set the following parameters.
Knob
1
Parameter
Adjustment
Inner Soft
Softness of the inside of edges
Bound Soft
Softness of the edge boundaries
Bound Soft
Parameter
Adjustment
H
Simultaneously adjust width of left
and right key borders
Setting values
0.00 to 100.00
0.00 to 100.00
Inner Soft
Setting values
0.00 to 100.00
DME Special Effect Operations
59

Advertisement

Table of Contents
loading

Table of Contents