Table of Contents
Advertisement
To automatically erase the graphic display
Turn Auto Erase on. The graphic display is erased automatically whenever a
keyframe is executed. It is displayed again after the keyframe ends, after the
time set in Recovery Time.
Flex Shadow center axis
When using the Flex Shadow function (see page 109), turn Flex Shadow Axis
on to display the Flex Shadow center axis. This is an effective aid in making
settings for this function.
Note
The Flex Shadow center axis function is not supported on the MVE-8000A.
Three-Dimensional Parameter Display
You can display a three-dimensional parameter list for the currently controlled
image. When more than one DME channel is selected, the status of the
reference channel is displayed.
For the method of displaying a parameter list and an example display, see
"Three-Dimensional Parameter Display" in Chapter 11 (Volume 2).
DME Special Effects
You can use DME to add a variety of special effects. To add effects, use the
DME menu. (See "DME Special Effect Operations" in Chapter 11 (Volume
2).)
106
Digital Multi Effects (DME)
Range displayed
on normal monitor
screen
Wire frame
Advertisement
Table of Contents
