Storage Expansion Blade Settings - Hitachi Compute Blade 500 Series User Manual

Save Settings
Select Save Settings and press Enter to save the new settings.
Restore Settings
Select Restore Settings and press Enter to cancel the change in settings
and to restore to the previous settings.
Load Default Settings
Select Load Default Settings and press Enter to cancel the change in
settings and to restore to the factory default settings.
Exit Setup
Select Exit Setup and press Enter to exit from the setup menu.
When the dialog to select either you want to exit setup menu or return to
setup utility appeared, press Y to exit the setup menu.
Tip: If you have unsaved changes, <Y> Save And Exit the Setup Utility is
appeared. And then press Y to save changed settings and exit.

Storage expansion blade settings

When installing 1 Gb 4-port/8-port LAN mezzanine card in the mezzanine
card slot 4 of a storage expansion blade, follow the steps shown below.
Enable/Disable Adapter Option ROM Support
Follow steps below to disable OPROM for the mezzanine card slot 4.
1 Start the remote console, and then click Power > Power On to power on
.
the server blade with storage expansion blade.
2 Press F1 key while "<F1> Setup" is being displayed at the bottom of the
.
window.
3 Select System Settings, and press Enter.
.
4 Select Devices and I/O Ports, and press Enter.
.
5 Select Enable/Disable Adapter Option ROM Support, and press
.
Enter.
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
2-19