WSM KX080-3 Mechanism
Lever stroke state and the operation when the lever is tilted in reverse direction
(1)
(2)
(1) When the lever is tilted from the neutral position to the reverse position, the push rod is pushed upward
by the damping spring (
(2) The oil in the T line is absorbed into the damper room through the 3 ball check valve portions.
If the lever is tilted in reverse direction from
The damping force is generated in both directions
(3) The oil inside the piston chamber passes out through the orifice. The pressure generated at this
moment is used for damping pressure (
(4) The oil outside the piston chamber flows through the pass that joins to the tank port at the top of the
casing. (
Operation direction)
(5) Full stroke
(6) Neutral
(6)
Operation direction)
to
Operation direction)
IV-M-72
(5)
(3)
, the left piston immediately acts as a damper piston
IV Hydraulic System
(4)