Mount The Rv Gear Assembly - Kubota KX080-3 Workshop Manual

WSM KX080-3 Service

(3) Mount the RV gear assembly.

1)I nstall RVgearA[4] inthehub [1].
2) Install the crankshaft [9] in the hub [1].
Note : Match the inner race of the tapered
roller bearing [22] of the crank shaft
[9] with the outer race hole of the
tapered roller bearing [22] fit in the
spindle [2].
3) Install RVgearB [5] inthe hub [1].
4) After applying lubricating oil to the pins [17]
(24 pins), insert between the pin groove of
the hub [1] and gear teeth groove.
IV-S-173
Hydraulic system