WSM KX080-3 Service
(4)(5)(6)
(7)(8)(9)(10)(11)
(12)
(c)
(15)(16)(17)
(1)(2)(3)
(A)
(a)
20mm(0.79inch)
12mm(0.47inch)
(13)(14)
(b)
(19)(20)
s.Pilot hose relay adapter
1.Fitting the adaptor
Position the adaptor in position as shown at left.
2.Adaptor tightening torque
G1/4 size
24.5~29.4N.m(2.5~3.0kgf.m)18.1~21.7ft.lbs
3.Quick-coupling adaptor
Pipe joint
Pipe joint
Make sure the hose connection is free from
detrimental scratches.
4.Fitting direction of the adaptor (pilot hose, 2)
Place the adaptor with the longer port facing the
swivel center, as shown at left.
5.Fitting the adaptor (pilot hose, 2)
Tightening torque
39.2~45.1N.m(4.0~4.6kgf.m)28.9~33.3ft.lbsAdapt
or (pilot hose, 2)
Location
1
Boom (down)
2
Arm (dump)
3
Arm (crowded)
4
Boom (up)
(d)
(18)
(21)(22)(23)
IV-S-206
Hydraulic system
Hose tape color
Yellow
Yellowish green
Blue
Green
(A)(Viewed from the machine top)
(a)(Relay plate)
(b)(To boom H/V)
(c)(Machine front)
(d)(Swivel center)
(1)Pipe joint (L, G1/4-G1/4)
(2)O ring
(3)Pipe joint (QL, G1/4-8.4)
(4)Pipe joint (L, G1/4-G1/4)
(5)O ring
(6)Pipe joint (S, G1/4-8.4)
(7)Pipe joint (L, G1/4-G1/4)
(8)O ring
(9)Pipe joint (T, G2-G2-G2)
(10)Pipe joint (S, G1/4-8.4)
(11)Pipe joint (QL, G1/4-8.4)
(12)Pipe joint (QL, G1/4-8.4)
(13)Adaptor (pilot hose, 2)
(14)Bolt
(15)Pipe joint (bushing G1/4)
(16)O ring
(17)Pipe joint (QL, G1/4-8.4)
(18)Pipe joint (QL, G1/4-8.4)
(19)Pipe joint (bushing G1/4)
(20)Pipe joint (QL, G1/4-8.4)
(21)Pipe joint (bushing G1/4)
(22)O ring
(23)Pipe joint (QL, G1/4-8.4)