Check Points Of Every 1 Year; Engine Oil Change; Replacing Air Cleaner Element - Kubota KX080-3 Workshop Manual

WSM KX080-3 Service

[10] CHECK POINTS OF EVERY 1 YEAR

Changing Engine Oil
• Be sure to stop engine before changing engine oil.
1. Start and warm up the engine for approx. 5 minutes.
2. Place an oil pan underneath the engine.
3. To drain the used oil, remove the drain plug (1) at the bottom of
the engine and drain the oil completely.
4. Screw the drain plug (1).
5. Fill new oil up to upper line on the dipstick (2).
• When using an oil of different maker or viscosity from the
previous one, remove all of the old oil.
• Never mix two different types of oil.
• Engine oil should have properties of API classification CD/
CE/CF/CF-4/CG-4.
• Use the proper SAE Engine Oil according to ambient
temperature.
Above 25 °C (77 °F)
0 °C to 25 °C (32 °F to 77 °F)
Below 0 °C (32 °F)
Engine oil capacity
(1) Drain Plug

Replacing Air Cleaner Element

1. Remove used air cleaner element.
2. Replace new air cleaner element.
• The air cleaner uses a dry element. Never apply oil to it.
• Do not run the engine with filter element removed.
III-S-53
SAE 30 or SAE 10W-30
SAE 10W-40
SAE 20 or SAE 10W-30
SAE 10W-40
SAE 10W or SAE 10W-30
SAE 10W-40
13.2 L
3.49 U.S.gals
(2) Dipstick
W1019006
W1020554
Engine