Water Valve - Kubota KX080-3 Workshop Manual

WSM KX080-3 Mechanism
k. Water valve
(3)
Heater core
inlet
(2)
(1)
(4)
Engine side
VI-M-20
The hot water valve (1) is connected with
the got water valve cable (2) and con-
trolled with the temperature control lever
on the control panel. This lever is used to
adjust the flow rate of hot water going into
the heater.
Set the temperature control lever to the
COOL position and the hot water valve
gets closed, allowing no hot water flow.
The hot water valve is built in at the right-
hand top of the center pillar.
(1) Hot Water Valve
(2) Hot Water Valve Cable
(3) Cable (control panel side)
(4) Rotary valve
VI Air Conditioner