Hydraulic Hose - Metallic Sealing Type; Hydraulic Hose - Quick-Coupling Type - Kubota KX080-3 Workshop Manual

WSM KX080-3 Service
y.Hydraulic hose
1.Metallic sealing type
Tighten to the specified torque.
G1/4 size
24.5~29.4N.m(2.5~3.0kgf.m)18.1~21.7ft.lbs
G3/8 size
37.2~42.1N.m(3.8~4.3kgf.m)27.5~31.1ft.lbs
G1/2 size
58.8~63.7N.m(6.0~6.5kgf.m)43.4~49.0ft.lbs
2.Quick-coupling type
G1-1/4 size
Couple the hose in position as shown at left.
Finally, make sure the hose does not come off.
3.Connecting the quick-coupling type hose
1) Couple the hose onto the joint until it clicks (in
the direction of arrow).
2) Pull the hose in the direction of arrow, as
shown below, to make sure it does not come
off the joint.
IV-S-214
Hydraulic system