Pulley; Rotor; Brush - Kubota KX080-3 Workshop Manual

Hide thumbs Also See for KX080-3:

Table of Contents

WSM KX080-3 Service

Pulley

1. Hold the rotor (base of the claw) in a vise. Loosen the lock nut

using a M24 box wrench.

Tightening torque

1. Remove the 4 screws and detach the bearing retainer.

2. Temporarily install the nut on the pulley screw, and detach the

1. When the rotor is detached, the 2 brushes are found to stretch

out of the shaft hole.

58.3 to 78.9 N·m

5.95 to 8.05 kgf·m

43.0 to 58.2 ft-lbs

Show Quick Links

Table of Contents