Engine Wsm - Kubota KX080-3 Workshop Manual

WSM KX080-3 Service
D.Engine WSM
The following engine WSM has been compiled after minor changing of original V3800DI engine WSM by
eliminating some pages which doesn't apply to construction machinery model of KX080-3.
Still some pages contain common specifications on V3800DI series engine.
Therefore, some date may differ from the engine mounted on constructinon machinery.
In that case, please come to the specifications in the front pages of KX080-3 WSM engine chapter.
******************************************************************************************************************
This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism,
service and maintenance of V3800DI-E2B, V3800DI-T-E2B. It is divided into three parts, "General", "Mechanism"
and "Servicing".
General
Information on the engine identification, the general precautions, maintenance check list, check and maintenance
and special tools are described.
Mechanism
Information on the construction and function are included. This part should be understood before proceeding with
troubleshooting, disassembling and servicing.
Refer to Diesel Engine Mechanism Workshop Manual (Code No. 97897-01870) for the one which has not been
described to this workshop manual.
Servicing
Information on the troubleshooting, servicing specification lists, tightening torque, checking and adjusting,
disassembling and assembling, and servicing which cover procedures, precautions, factory specifications and
allowable limits.
All information illustrations and specifications contained in this manual are based on the latest product information
available at the time of publication.
The right is reserved to make changes in all information at any time without notice.
Due to covering many models of this manual, information or picture being used have not been specified as one
model.
© KUBOTA Corporation 2004
TO THE READER
III-S-29
Engine
July 2006
March 2004