WSM KX080-3 Service
17.Install the NHU packing (210) into the pIug.
When you install the NHU packing, pay
attention to its direction. (Refer to the
following figure.)
Apply a thin fiIm of grease to the NHU
packing before installing it.
18.Install the grease cup (203) into the plug.
19.Install the push rod (214) into the plug.
Apply the lubricating oil to the surface of
the push rod before instalIing it.
Do not insert the push rod with a strong
force so as not to damage the Iip of the
NHU packing.
20.Install the push rod subassembly, assembled
in 13-16 above, in the casing.
IV-S-127
Hydraulic system
(1)
1)NHU packing