Checking And Adjusting The Tubrocharger; Turbine Side Check; Compressor Side Check; Radial Clearance - Kubota KX080-3 Workshop Manual

WSM KX080-3 Service
(6) Turbocharger
Turbine Side
1. Check the exhaust port (3) and inlet port (5) side of turbine
housing (1) to see if there is no exhaust gas leak.
2. If any gas leak is found, retighten the bolts and nuts or replace
the gasket (2) / (4) / (6) with new one.
(1) Turbine Housing
(2) Gasket
(3) Exhaust Port
Compressor Side
1. Check the inlet hose (1) of the compressor cover (3) to see if
there is no air leak.
2. Check for loose connections or cracks in the suction side of the
intake hose.
3. If any air leak is found, change the clamp (2) and or inlet hoses.
(1) Inlet Hose
(2) Clamp

Radial Clearance

1. If the wheel contact to the housing, replace the turbocharger
assembly with new one.
III-S-115
(4) Gasket
(5) Inlet Port
(6) Gasket
W1076917
(3) Compressor Cover
W1077032
W1077353
Engine