When The Check-Up Is Finished; Horn Switch; Horn Switch; Working Light Switch - Kubota KX057-4 Operator's Manual

20 CHECKS BEFORE START
BWhen the Check-up is Finished
With the check-up finished, take the following procedure
to make the Periodic Check disappear from the screen.
1. The message below appears onscreen to see if the
check-up is finished or not.
2. To take a look at the check points, press the
information switch.
onscreen.
3. When the check-up has been finished, press the finish
switch (Switch 5). If not, press the unfinish switch
(Switch 1) to go back to the previous screen.
(1) Information switch (Switch 4)
(2) Unfinish switch (Switch 1)
(3) Finish switch (Switch 5)
BHorn Switch

(1) Horn switch

The check points appear
BWorking Light Switch
When the starter switch is in position "RUN", the light(s)
will be switched on by pressing the switch.

(1) Working light switch

C Night operation
To avoid personal injury:
A Visibility is reduced in darkness, therefore the
working light and CAB light only alone may not
be enough. In which case, prepare additional
stationary artificial lighting, observe safety
rules as well as special regulations for night
work.