Wire Harness Installation - Engine Earth, Starter Switch - Kubota KX080-3 Workshop Manual

WSM KX080-3 Service
b. Engine earth, starter switch
(1) Tightening torque of the cable fixing nut to the sel-motor
S
terminal
Tightening torque 5.9 ~ 11.8 N·m (0.6 ~ 1.2 kgf·m) 4.34~8.68ft.lbs
(2) Installation of starter switch (RC411-5346 )
S
1. Starter switch groove to be fitted to the projection of the
cover (top right)
2. Nut tightening torque 4.0 ~ 5.0 N·m (0.4 ~ 0.51 kgf·m) 2.89~3.69ft.lbs
(3) Checking the automatic starter release function
S
Start the engine, place the key switch back to the start position
and make sure the starter is not activated.
(4)
(3)
(5)
V-S-8
Electrical system
(1)
(A)
(2)
(B)
(A)Cover (right, top)
(B)Starter switch
(1)Projection (behind)
(2)Groove
(3)Cord (body ground)
(4)Bolt
(5)Bolt