WSM KX080-3 Service
3.Unscrew the Allen screw (522) with an Allen
wrench. Remove the pedal (520).
4.Unscrew the Allen screw (473) with an Allen
wrench. Remove the block (431).
5.Remove the bellows (501) from the cover
(201) by pulling the bellows upward.
6.Loosen the setscrew (423) with an Allen
wrench.
Be careful because Loctite #241 is applied
to the setscrew and the tightening torque
is large.
IV-S-114
Hydraulic system