WSM KX080-3 Service
15.Remove the spring seat (218) from the
casing.
Note down the positional relationship
between the spring seat and the hole in
the casing.
16.Remove the steel balI (225) usingadevice,
such as a magnet.
Take care not to losethe steel ball.
17.Remove the locking ring (221) from the
casing using piiers.
Note down the positional relationship
between the locking ring and the hole in
the casing.
Be careful because the bush may be
pushed out by the return spring (335) while
the locking ring is removed.
Take care not to damage the casing inside
surface.
Caution
18.Takethebush (223) out of the casing using
tweezers.
Note down the positional relationship
between the bush and the hole in the
casing.
IV-S-117
Hydraulic system