Dozer Pilot Valve - Kubota KX080-3 Workshop Manual

WSM KX080-3 Service
(1)(2)
(3)(4)(5)
(6)
(b)
(7)(8)(9)(10)(11)
(c)
(14)(15)(16)
(A)
(a)
1
2
P T
(c)
(12)(13)
IV-S-107
f.Dozer pilot valve
1. Adapter and joint
1)Fitting the adaptor
Port P
Filter
Pipe joint
Pipe joint
Ports T, 1 and 2
Fit the adaptor in position as shown at left.
2)Adaptor tightening torque
G1/4 size
24.5~29.4N.m(2.5~3.0kgf.m)18.1~21.7t.lbs
3)Fitting direction of the valve
Position the valve with ports P and T facing the
machine bottom.
4)Quick-coupling adaptor
Pipe joint
Make sure the hose connection is free from
detrimental
5)Fitting the valve assembly (pilot OFF)
Tightening torque
48.1~55.9N.m(4.9~5.7kgf.m)35.5~41.2t.lbs
Dozer P/V
Location
1 Dozer (down)
2 Dozer (up)
P Port P
T Port T
(A)(Viewed from the machine center)
(a)Machine fron
(b)(Port P)
(c)(Port T)
(1)Valve assembly (pilot OFF)
(2)Bolt
(3)Pipe joint (bushing G1/4)
(4)O ring
(5)Pipe joint (QL, G1/4-8.4)
(6)Pipe joint (QL, G1/4-8.4)
(7)Filter
(8)O ring
(9)Pipe joint (L, G1/4-G1/4)
(10)O ring
(11)Pipe joint (QL, G1/4-8.4)
(12)Pipe joint (T, G2-G2-G2)
(13)Pipe joint (QL, G1/4-8.4)
(14)Pipe joint (bushing G1/4)
(15)O ring
(16)Pipe joint (QL, G1/4-8.4)
Hydraulic system
Hose tape color
Brown
Pink
White
None