Pilot Hose Relay Plate - Kubota KX080-3 Workshop Manual

WSM KX080-3 Service
(A)
(1)
(C/V)
(2)(3)
IV-S-205
r.pilot hose relay plate
1.Fitting the bracket (pilot hose)
Position the bracket in position as shown at left.
2.Bolt tightening torque
48.1~55.9N.m(4.9~5.7kgf.m)35.4~41.2ft.lbs
3.Connecting the quick-coupling hoses
Connect the hoses to the holes. Match the
numbers of holes in the figure and those of
the hoses in the table, as shown at left.
4.Nut tightening torque
62.8~72.6N.m(6.4~7.4kgf.m)46.3~53.5ft.lbs
5.Quick-coupling hose ends
Make sure the hose connection is free from
detrimental scratches.

(Pilot hose relay plate)

Location
1 Boom (up)
2 Bucket (dump)
3 Dozer (up)
4 Boom (down)
5 Bucket (crowded)
6 Dozer (down)
7 Arm (dump)
8 Spare
9 Spare
(A)(Machine front)
(1)Nut
(2)Bracket (pilot hose)
(3)Bolt
Hydraulic system
Tape color
Green
Red
Pink
Yellow
Orange
Brown
Yellowish green
None
None